15kV Modified Polyethylene HDPE Cable Spacer

Certificate of Patent, SGS Certification, Reliable & Professional

In stock
SKU
JHW-15CS-02
Rating:
100% of 100
$5.77
    Buy more,save more
  • Quantity
    Price/Set
  • 30 ~ 49/set
    $5.48
  • 50 ~ 79/set
    $5.19
  • >80/set
    $4.85

15kV Modified Polyethylene HDPE Cable Spacer


                    15KV-2.png


Our products support customization as per client's requirement

Specification: SGS certification

Transport Package: Export Carton or as Customized

Our products Support Sample Order

Contact online for more information,please. 24 hours are ready for you.



Model Numbers

JHW-15CS-02

Nominal Voltage(kV)

15

Cantilever Strength(kN)

4.5

Low Frequency Flashover Voltage

Dry/kV

58

Wet/kV

45

Low Frequency Withstand Voltage

Dry/kV

45

Wet/kV

35

Critical Impulse Flashover Voltage

Positive/kV

80

Negative/kV

95



HDPE cable spacer has the following Characteristics:

1. Excellent Track-Resistant

2. High Chemical Resistance

3. Unbreakable and Light Weight

4. Easiest Handling and Transportation

5. Low Initial Cost

6. Long Service Life

7. Durable Metal Treads

8. Water Repelling Surface

9. High resistance to traction, flexion and impact


Our Company Development Process

In 2015, our company obtained the patent for the invention of polymeric crystalline silicon materials.

In November 2016, our company applied for invention patents to the State Patent Administration: invention patents for polymerized crystalline silicon insulator materials for communication, which is currently in the public stage.
In June 2017, our company wanted the National Patent Office to apply for an invention patent: the invention patent for DC polymerized silicon insulator material, which is currently in the public stagee .


Here are our SGS certification:




Advantages of polymeric silicon:


Less production process, short cycle, high efficiency, and traceable production process and with small production operation area,it is easy to realize mechanized production.


Characteristics:

Green Environmentally friendly Low carbon
Strong acid and alkali: no change
Flame retardant grade:V0
Water absorption rate: 0.012%
Stepping damage load test: 3360N
Resistance to electric leakage and erosion: 1A4.5


Testing Report


In April 2017, the horizontal drop testing site


Test method: A 110kV length of 1240mm polymerized silicon insulator is free fall from a height of 7 meters.


Testing Results: The appearance of the product was free from cracking and brittleness, and the tensile failure test passed the standard requirements.

Please see the photos below:


Original-Xaar-128-80PL-Printhead-Blue-XAAR-Print-head-NEW-200dpi-FREE-Swabs

In November 2017, it fell vertically to the test site.


Test method:110kV rod-shaped suspension polymerized silicon insulator was dropped vertically from a height of seven meters with the ball socket facing down. After the fall, checking if the seals at both ends of the fittings are sealed, and whether the entire insulator is intact. Then continue to pull, test, and achieve damage.

Testing results:
After the insulator falls, there is no damage at the seals at both ends. When the tensile force test reaches 150kN, the metal fitting of the ball is broken and the insulator is intact.

Please see the photos below:


Original-Xaar-128-80PL-Printhead-Blue-XAAR-Print-head-NEW-200dpi-FREE-Swabs

Inductor center bending test in December 2017


Testing method: The rod-shaped suspension polymerized silicon insulator was pulled up 6 times with a vertical center pulling force. After pulling, check whether the entire insulator is intact. Whether the key area is pulled, broken, broken, or dropped. A 42-hour boiled test was carried out after 6 bends, and a lightning shock steep slope test was carried out after the boiled test.

Testing Result: There is no breakage or blockage after the insulator is boiled, and the lightning impulse meets the requirements of GB standard.

Please see the photos below:


Original-Xaar-128-80PL-Printhead-Blue-XAAR-Print-head-NEW-200dpi-FREE-Swabs

Widely Application abroad

Our products have been promoted and used on Many 10KV-66KV lines on all continents of the United States nowadays. Having been cooperating and communicating with many companies in USA on plenty of projects,we have accumulating much valuable experience,which encourages us to better improve our products further. 


Original-Xaar-128-80PL-Printhead-Blue-XAAR-Print-head-NEW-200dpi-FREE-Swabs

More Information
Color No
Neon Rope Length No
Write Your Own Review
You're reviewing:15kV Modified Polyethylene HDPE Cable Spacer
Your Rating
Close