The 6S 8000mAh 25C LiPo battery from Dupu Electronics is designed for pilots and operators who need a perfect balance of high capacity, steady power delivery, and flight-time efficiency. With 177.6Wh of energy and a robust 25C discharge rating, this pack delivers consistent performance for long-range missions, aerial surveying, agricultural spraying, and heavy-payload UAV operations.
Key Features:
- ✅ High Energy Capacity: 8000mAh at 22.2V = 177.6Wh — significantly extends flight time vs. standard 5000–6000mAh packs.
- ✅ Stable 25C Discharge: Supports up to 200A continuous current — sufficient for most 6"–8" multirotors and industrial drones.
- ✅ Optimized Size & Weight: Compact 170×60×54mm form factor fits many standard drone battery trays; weight kept low at 1.27kg for its class.
- ✅ Customizable Connectors: Pre-soldered leads allow easy installation of your preferred plug (XT60, XT90, EC5, AS150, etc.).
- ✅ Quality Construction: Premium-grade LiPo cells with low internal resistance, factory-matched for balance and longevity.
- ✅ Safety-Focused Design: Heat-resistant shrink wrap, reinforced insulation, and strict QC testing ensure safe operation in field conditions.
Ideal Applications:
- Long-range FPV or mapping drones
- Agricultural UAVs (crop spraying, monitoring)
- Industrial inspection (power lines, pipelines, wind turbines)
- Aerial photography & cinematography platforms
- Custom heavy-lift or payload-carrying drones
Technical Specifications:
| Parameter | Value |
|---|---|
| Configuration | 6S1P |
| Nominal Voltage | 22.2 V |
| Capacity | 8000 mAh |
| Continuous C-Rate | 25C |
| Max Continuous Current | 200 A |
| Energy | 177.6 Wh |
| Dimensions (L×W×H) | 170 × 60 × 54 mm |
| Weight | 1270 g |
| Charge Rate (Recommended) | 1C (8A) |
| Balance Plug | JST-XH (standard) |
| Discharge Plug | Bare wires / Custom |
Battery Usage Precautions
Please read the following information carefully before purchase.
Before using the battery, please confirm the battery pack voltage.
The full charge voltage of each lithium polymer cell is 4.2V (high-voltage version: 4.35V).
For new batteries, avoid charging with excessive current to minimize battery degradation.
Typically, charge at around 1C current. Use a balance charger specifically designed for RC batteries and select the correct battery type mode.
Incorrect charging mode may cause unexpected hazards.- During charging, place the charger and battery in an open, unobstructed area, away from other items, and ensure someone is supervising the process.
- During discharge, use a beeper or alarm system (e.g., BB warning) to set the low-voltage cutoff per cell to approximately 3.6V to prevent over-discharge.
- When not used for a long time, store the battery at around 3.85V per cell.
Storing at full charge or low voltage can damage the battery and shorten its lifespan.
If unused for more than one month, perform a charge-discharge cycle once a month. - When not in use, disconnect the battery from the model or device, and store it in a dry, well-ventilated environment with temperature not exceeding 30°C.
For your safety, never puncture the battery casing to release gas, even if swelling occurs due to any reason. This may cause fire or explosion.
