The 6S 12000mAh 25C LiPo battery from Dupu Electronics is the ultimate power solution for industrial UAVs, agricultural drones, heavy-lift platforms, and long-endurance aerial systems that demand maximum energy capacity without compromising safety or stability.
With a massive 266.4Wh of stored energy and a robust 25C discharge rating, this battery delivers up to 300A of continuous current—enough to support demanding takeoffs, sustained climbs, and payload operations in challenging environments. Whether you're spraying crops over hundreds of acres, inspecting infrastructure, or deploying sensors on extended missions, this pack ensures you stay airborne longer and operate with confidence.
Key Features:
- ✅ Industry-Leading Capacity: 12000mAh at 22.2V = 266.4Wh — one of the highest-capacity 6S packs available for commercial drones.
- ✅ High Continuous Current: 25C rating supports 300A sustained output, ideal for multi-motor systems under load.
- ✅ Optimized for Heavy-Duty Use: Designed for agricultural sprayers, mapping drones, and surveillance UAVs requiring 30+ minutes of flight time.
- ✅ Durable Construction: Premium-grade LiPo cells with low internal resistance, factory cell-matched for balance and longevity.
- ✅ Customizable Connectors: Standard options include XT90 or AS150; other high-current plugs available upon request.
- ✅ Safety First: Reinforced insulation, heat-resistant shrink wrap, and strict quality control ensure safe operation in field conditions.
Technical Specifications:
| Parameter | Value |
|---|---|
| Configuration | 6S1P |
| Nominal Voltage | 22.2 V |
| Capacity | 12000 mAh |
| Continuous C-Rate | 25C |
| Max Continuous Current | 300 A |
| Energy | 266.4 Wh |
| Dimensions (L×W×H) | 185 × 71 × 55 mm |
| Weight | 1524 g |
| Recommended Charge Rate | 1C (12A) |
| Balance Plug | JST-XH (standard) |
| Discharge Plug | XT90 / AS150 / Custom |
Battery Usage Precautions
Please read the following information carefully before purchase.
Before using the battery, please confirm the battery pack voltage.
The full charge voltage of each lithium polymer cell is 4.2V (high-voltage version: 4.35V).
For new batteries, avoid charging with excessive current to minimize battery degradation.
Typically, charge at around 1C current. Use a balance charger specifically designed for RC batteries and select the correct battery type mode.
Incorrect charging mode may cause unexpected hazards.- During charging, place the charger and battery in an open, unobstructed area, away from other items, and ensure someone is supervising the process.
- During discharge, use a beeper or alarm system (e.g., BB warning) to set the low-voltage cutoff per cell to approximately 3.6V to prevent over-discharge.
- When not used for a long time, store the battery at around 3.85V per cell.
Storing at full charge or low voltage can damage the battery and shorten its lifespan.
If unused for more than one month, perform a charge-discharge cycle once a month. - When not in use, disconnect the battery from the model or device, and store it in a dry, well-ventilated environment with temperature not exceeding 30°C.
For your safety, never puncture the battery casing to release gas, even if swelling occurs due to any reason. This may cause fire or explosion.
