150MM HEATING TUBE BENDER FOR CHANNEL LETTER 110V/220V

Product name:Acrylic heat Bending Machinery 
Voltage:110V/220v 
power:150w 
packing size: 30*21*5CM 
Type:150MM heating tube 

Usage method: 
The same word strake and strake and strake on both sides of the iron on the edge of the heating, 
the two heating rods are respectively in the edge, such as edge folded inward, the inner heating rods attached to the ironing (heating rod at the bottom of the attached to the edge, the upper part of the left about 1.5mm), 
such as edge fold outward, the lateral heating rods attached to the edge ironing (heating rod at the bottom of the attached to the edge, the upper left about 1.5mm), bending operation, will always be on the side of the heating rod is attached to the edge, burn marks, the edge of the other side is smooth and straight mm thick edge of the heating time about 9-11 seconds, took off the iron, the edge fold to and literal stroke angle can be.

We can provide with the user manual to help you for better use.