Feature:
1.High luminous flux 20 times more than 3528 LEDs.
2.2835 1.5W LED source with heat sink, well heat transferring.
3.High light transmittance PMMA lens.
4.Constant current driver ensuring full bunch in same brightness and stably working.
5.Al substrate for LED and components in a low temperature condition.
6.Secondary optic design, 160degree visual angle resulting better, average brightness and no brighter dots.
7.Best sealed, IP65 with moisture-proof, water-proof, dust proof and impact resistance.
8.Nice structure and design in PC process. Whole unit has been formed in one-time injection molding.
9.RoHS standard of all raw materials.
10.Long lifespan and low failure rate.
11. Color temperature: 6000-7000K
Specification:
|
Parameters (Room temperature =25°C) | ||
|
Items |
Parameter |
Unit |
|
LED type |
2835 |
- |
|
LED Quantity |
3 |
PCS |
|
Concatenation |
20 |
PCS |
|
Dimension |
86 x 18 x 7.2 |
mm |
|
Power |
1.5±10% |
W |
|
Input V. |
DC12 |
V |
|
Input C. |
0.125 |
A |
|
Surface Temp. |
<40 |
°C |
|
Working Temp. |
-20 ~ +45 |
°C |
|
Storage Temp. |
-30 ~ +60 |
°C |
|
Protect Level |
IP65 |
- |
|
Optical and Electrical Parameters (Room temperature =25°C) | ||||||
|
Test Item |
Test Condition |
Symbol |
Parameters |
Unit | ||
|
Min. |
Typical |
Max | ||||
|
Color Temperature |
DC12V |
CCT |
3000 |
6000 |
15000 |
K |
|
Ra |
DC12V |
CRI |
75 |
80 |
85 |
-- |
|
Luminous Flux |
DC12V |
Φ |
115 |
120 |
125 |
lm |
|
Light Efficiency |
DC12V |
LPW |
-- |
83 |
-- |
lm/W |
|
Visual Angle |
DC12V |
Wd |
-- |
160 |
-- |
Deg |
Instructions:
1. Installation
-- First position the module with double sided tape onto the back of module, then fix with glue.
-- Silicone gel directly fixing modules, but before installation, cleaning or polishing module surface.
-- Screw mounting the modules on the board.
2. Modules Positioning (Vertical and Horizontal)
|
Item Code |
Light box thickness dh (mm) |
Module horizontal distance |
Module vertical |
Modules average |
Surface illumination(lux) |
|
M2835-3007 |
120 |
180 |
120 |
40 |
1116 |
|
Remarks: | |||||
Application:
1.Advertisement signs backlighting
2.LOGO & Letters backlighting
3.Advertisement Light boxes and billboards backlighting
4.Landscape, commercial, home and stage decoration Noted:
Notice:
1.The output of power supply should be matched with the module’s working voltage as modules don’t have short circuit protection, overloading protection.
2.The +/- of the modules should be connected rightly: red-anode and white-cathode.
3.Max 20pcs in one bunch, better not more than this as it will cause lower brightness or danger. If need over 20pcs modules, suggesting connection first in series then parallel.
4.Power supply should be 20-30% more than the exact LEDs power, and wires should be a little bigger than the current which is needed.
5.Modules forbidden to be put into an inflammable substance, never be covered with a tight cover or onto the heat insulated sheet materials.
6.In case of installation or replacement, sure first to cut off power.
7.This type LED modules are not for dimmable function.
8.If there is something unusual (dark or flickering), pls check firstly power is right on or output voltage is correct. If all is right, pls change the module.
9.This module is only used for light boxes, signs which have cover to protect modules, not used in outdoor or directly opening conditions.
10. Standard to: EN55015 EN61547 EN60598-1
Packaging & Delivery:
Delivery Time: 3-5 working days（FedEx or DHL）.
Production Time: 2-5working days (depends on order quantity).
