Engineered for serious pilots who demand both power and flight time, the 6S 6200mAh 60C LiPo battery from Dupu Electronics delivers exceptional energy capacity, stable high-current output, and reliable performance under extreme conditions. With a nominal voltage of 22.2V and a continuous discharge rate of 60C, this pack provides up to 372A of sustained current—ideal for aggressive freestyle, long-range missions, or heavy-lift FPV platforms.
| Item | Specification |
|---|---|
| Model | 6S 6200mAh |
| Discharge Rate (C-Rate) | 60C Continuous |
| Connector | Solderable (Custom Connector Available) |
| Dimensions | 158 × 44 × 58 mm |
| Weight | 0.880 kg (880g) |
| Energy Capacity | 137.6 Wh |
| Nominal Voltage | 22.2 V |
- High Energy Capacity: 137.6Wh (6200mAh × 22.2V) for extended flight times
- Robust Power Delivery: 60C continuous discharge ensures stable voltage even during intense maneuvers
- Precision Cell Matching: Factory-balanced cells for consistent performance and longer cycle life
- Customizable Connector: Supports welding of XT60, AS15, EC5, or other discharge plugs per your build
- Optimized Dimensions: 158 × 44 × 58 mm – fits most 6"–8" frames and larger racing/freestyle quads
- Weight: Only 880g – excellent power-to-weight ratio for its class
- Safety First: Built with heat-resistant shrink wrap, reinforced insulation, and strict quality control
Whether you're pushing the limits in technical freestyle, exploring distant horizons on a long-range build, or training with a high-thrust platform, the 6S 6200mAh 60C from Dupu gives you the endurance, reliability, and headroom to fly with confidence.
Battery Usage Precautions
Please read the following information carefully before purchase.
Before using the battery, please confirm the battery pack voltage.
The full charge voltage of each lithium polymer cell is 4.2V (high-voltage version: 4.35V).
For new batteries, avoid charging with excessive current to minimize battery degradation.
Typically, charge at around 1C current. Use a balance charger specifically designed for RC batteries and select the correct battery type mode.
Incorrect charging mode may cause unexpected hazards.- During charging, place the charger and battery in an open, unobstructed area, away from other items, and ensure someone is supervising the process.
- During discharge, use a beeper or alarm system (e.g., BB warning) to set the low-voltage cutoff per cell to approximately 3.6V to prevent over-discharge.
- When not used for a long time, store the battery at around 3.85V per cell.
Storing at full charge or low voltage can damage the battery and shorten its lifespan.
If unused for more than one month, perform a charge-discharge cycle once a month. - When not in use, disconnect the battery from the model or device, and store it in a dry, well-ventilated environment with temperature not exceeding 30°C.
For your safety, never puncture the battery casing to release gas, even if swelling occurs due to any reason. This may cause fire or explosion.
