• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control;
• Constant temperature technology, longer life;
• Easy operation, time-saving;
• The heating plate using oxidation treatment, heating don't smoke;
Used for:
It is suitable for heating acrylic within 1.5mm – 4mm (0.06" x 0.16") thickness.
Specification:
Voltage: 100-240V
Power: Angle bending 39W
Heating Temperature: 200°C±5%
Angle Heater Size: 100mm x 2.5mm x 2mm (3.9" x 0.1" x 0.08")
Bending Letter Hight: 0 - 100mm (3.9")
Bending Thickness: 1.5mm - 4mm
Angle bending soft time (2.5mm thickness, 20℃): About 3 seconds
Processing Material: Acrylic, Plastic, PVC, Plexiglass.
This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.
Details:
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm.
• With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity.
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order.
2 comments