TYPE One:
Materials Height: ≤50mm
Materials Thickness:
Stainless steel thickness less than 0.5mm
Galvanized sheet thickness less than 0.6mm
Aluminum strip thickness less than 0.7mm
Feature:
1. It use lever and parallel pressure to bend sharp and round angle with precise folding position.
2. It can bend metal strip below height 50mm, thickness 0.5mm.
3. The pressure point can be adjusted according to material thickness which make it easy to make perfect metal channel letters.
4.This is the arc angle bender,U type bender.
5.It will increase metal letter making efficiency 3-4 times and make smooth,beautiful metal letters.
TYPE TWO:
Specification:
Materials Height: ≤50mm
Materials Thickness: ≤0.5mm stainless steel strip; ≤0.6mm galvanized strip; ≤0.7mm aluminum strip
Feature:
1. It use lever and parallel pressure to bend sharp and round angle with precise folding position.
2. It can bend metal strip below height 50mm, thickness 0.5mm.
3. The pressure point can be adjusted according to material thickness which make it easy to make perfect metal channel letters.
