30W DC pump, speedy connector.
Mainly used on the equipment for heat exchange between the heat and the air environment.
Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature.
Please confirm before place an order. The products are nonrefundable after selling, only if quality issue.
• Small thermolysis water cooler, energy saving, long working life and simple operation;
• You can choose different models according to local voltage and frequency.
• CW-3000H water chiller, comprehensive reference to the international radiator - type cooling system, is suitable for small water cooling device.
• Specific disconnection alarm securing protection.
• Enclosed water tanks, water used for a long time.
• With completed water flow and over high temperature alarm functions;
• Professional forced air - cooled radiator, high heat dissipating capacity and not easy to be blocked.
• Equipped with alarm output port, can quickly protect sensitive components.
• Multiple power specifications; CE approval; RoHS approval.
• High cost performance, low failure rate.
• CW-3000 laser water chiller is suitable for small water cooling device;
• Provide stable working conditions for laser devices;
• Water can be used for a long time;
• High heat dissipating capacity and not easy to be blocked;
• Alarm output port can quickly protect sensitive components.
• Water can be used for a long time;
• High heat dissipating capacity and not easy to be blocked;
• Alarm output port can quickly protect sensitive components.
• Specific disconnection alarm securing protection;• High cost performance, low failure rate;
• Cool Capacity is 50W / ℃;
• Forces circulation, 9L cooling tank capacity;
• It can extend the using life of laser tube and ensure the engraving effect better.
• Cool Capacity is 50W / ℃;
• Forces circulation, 9L cooling tank capacity;
• It can extend the using life of laser tube and ensure the engraving effect better.
| Model | CW-3000DG |
| Power Supply | AC100 - 120V, 60Hz |
| Current | 0.45A |
| Tank Capacity | 9L |
| Cooling | Radiator that forces the wind cooling |
| Amount of Cooling | 50W / ℃ |
| Way of Circulation | Water pump forces circulation |
| Maximum Flow | 10L / min |
| Maximum Pumping Lift | 10m |
| Inlet and Outlet | External Dia.: 8mm brass connector |
| Protection | Flow alarm |
Alarm Function’s Description
The cooling water circulation loop alarm causes and the work of the state table
The cooling water circulation loop alarm causes and the work of the state table| Items | Green light | Red light | Buzzer | Out H1, H2 | Out H1, H3 |
| Normal | On | OFF | No voice | OFF | On |
| Water stops up | OFF | On | Voice | On | OFF |
| Surpasses 60℃ | OFF | On | Voice | On | OFF |
| Pump breakdown | OFF | On | Voice | On | OFF |
| Water alarm | OFF | On | Voice | On | OFF |
| Faulted circuit | / | / | / | On | OFF |
| No Power | / | / | / | On | OFF |
Maintenance
Cooling machine used in long term, you should open the machine and clean the dust in order to ensure
good heat dissipation.
You can use non – corrosive antifreeze if you are in the northern cold regions.
| Our water cooling machine has S & A logo on the top of injection port. | Fake cooler without the logo. |
| Our water chiller has function of Intelligent temperature control. | Fake cooler without this function. |
| Our water chiller has S & A trademark in this label. This image is only to show the brand, specific parameters will vary depending on the model, please refer to the specifications table parameters prevail. | Fake cooler without this trademark. |
| Our water chiller has S & A logo on the outfall | Fake cooler without this logo |
Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps.
A. Open the package and check the machine and all accessories.
B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water).
C. Connect the inlet and outlet hose between water cooler and laser engraving machine.
D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow).
E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm).
Caution
A cooler water condition in the absence of electricity is prohibited!
Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm.
Cooling machine no use for long time or in transport must keep emptying the cooling water.
To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10℃), and it will continue to work when the water temperature rose to higher (about 20℃).
A. Open the package and check the machine and all accessories.
B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water).
C. Connect the inlet and outlet hose between water cooler and laser engraving machine.
D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow).
E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm).
Caution
A cooler water condition in the absence of electricity is prohibited!
Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm.
Cooling machine no use for long time or in transport must keep emptying the cooling water.
To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10℃), and it will continue to work when the water temperature rose to higher (about 20℃).
Wooden Box: There is total one carton box.
| Machine Dimension | 470mm x 270mm x 370mm (18.5" x 10.6" x 14.6") |
| Machine Weight | 13kg |
| Package | Carton box |
| Packing Size | 590mm x 400mm x 490mm (23" x 15.8" x 19.3") |
| Gross Weight | 19kg |
Caution:
The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!
Packing List:
Packing List:
 | CW3000 water chiller machine | 1 set |
 | Power cable | 1 pc |
 | Connection hose | 1 pc |
 | Sealing washer | 2 pcs |
 | 250V/2A spare fuse (Mounted on the power socket interface within the insurance reserve) | 1 pc |
 | User manual | 1 pc |
 | Alarm signal output plug | 1 pc |
Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!
Package:
Warranty :Comprehensive guarantee for 2 years except the wearing parts.
24 - hour technical support by email or calling.
English user manual for machine using and maintaining.
24 - hour technical support by email or calling.
English user manual for machine using and maintaining.
