Installation Guide
Base + Cover modular design, easy and quick installation.
Surface Mounting
1. Secure the Base First
1. Secure the Base First
Simply nail it in place, no need for clips or studs. Saves costs, reduces steps, simple and convenient.
2.Attach the LED Strip into the Groove
Secure the LED strip, connect the power supply, and test if the strip is functioning normally.
3.Cover with the Top Panel and Press Firmly to Secure
Modular design makes future maintenance easier.
Recessed Installation
1. Secure the Base First、
Place the base in the pre-cut groove and secure it directly with nails or silicone adhesive. This method is simple andconvenient.
Place the base in the pre-cut groove and secure it directly with nails or silicone adhesive. This method is simple andconvenient.
2. Attach the LED Strip into the Groove
Secure the LED strip, connect the power supply, and test if the strip is functioning normally.
Secure the LED strip, connect the power supply, and test if the strip is functioning normally.
3.Cover with the Top Panel and Press Firmly to Secure
Modular design makes future maintenance easier.
Note: When installing and using adhesive, make sure to use neutral adhesive. Do not use acidic or alkaline adhesives asthey can cause the silicone to yellow.
